×
Changing a pendant light shade is an easy project that most people can do themselves. Pendant shades are usually made out of cloth or glass and are often hung from the ceiling with chains or cords. This article will show you how to change a pendant light shade/cover, which will give your room a whole new look!
Updating your shades is a good thing to do when you are doing renovations. Shades usually cost less than changing the whole light fixture, and they also hold their value. If you are doing a full renovation, it is easy to change out the light fixture because you have tools or professionals around who can do this for you.
Many people can change a lamp shade without needing any special tools or hiring professionals. First, measure the fitter size of the lamp. Then order a corresponding shade. Unscrew the thumb screws that are holding on to your current shade and switch it out for your new one!
Lamp shades can also be a long-term investment. They have character and value as they get older. You can collect lamp shades like linens and china if you want to. When you need new ones, you can get them because you might not be able to buy the old ones anymore. If you plan ahead, your kids and grandkids will want to keep your lampshades when they become adults.
Hold the glass carefully. Reach in from below and take out the light bulb from the pendant’s socket. Take off the shade ring to release your light bulb from its cord and socket. Now you can see all of your pendant’s parts here.
 |
| Confused When Choosing Where Light Should Be? |
| Anyone can improve their lit spaces with our simplified online lighting design course that uses the 5 key ingredients of interior lighting to quickly equip you to create wonderful interiors. |
| Click Here to Learn More |
Lighting Design Course #1 |
First unplug the lamp and remove the light bulb. Then unscrew with your fingers the decorative screw that holds the lampshade in place by using your fingers. Next, squeeze the socket shell and pull it out of the lamp base. Loosen the set-screw on the lamp socket base by using a screwdriver or any other tool you have handy and then gently pull on all of wires until they are free from inside of it. You can attach this new one now by following these steps in reverse order so that you end up with a new working light fixture!
Step 1: Unscrew the light bulb.
Step 2: Spray paint the hardware.
Step 3: Paint the threaded sockets of your light fixture.
Step 4: Put together a new light fixture makeover assembly.
If the light does not work with a new bulb, check the circuit breaker or fuse. The problem might be that the old bulb went out as soon as it was turned on. If that is not the case, try cleaning the socket in the fixture.
Step One: Measure the light fixture to make sure you order a size that fits.
Step Two: Take down your old lamp shade and clean any dirt or dust off of it.
Step Three: Paint from top to bottom if necessary, then let dry.
Step Four: Attach new bulbs and plug in for instant update!
Step Five: Keep your new lamp shade clean. Dust on the top will make it look dirty quickly because of how close to the ceiling it is. Use a feather duster, damp cloth or dry vacuum cleaner with brush attachment if necessary.
Step One: Get a stepladder.
Step Two: Reach up to remove the light bulb from its socket, unscrewing it with your fingers if necessary.
Step Three: Remove the screw that holds in place the decorative cover and then pull out on all of the wires until they are free from inside of it.
Step Four: Gently pull on the wires until they are free from inside of it.
Step Five: Follow these same steps in reverse order to put your new lamp shade up!
 |
| FREE Cheat Sheet to Discover How Bright Your Light Should Be |
| Download this FREE printable cheat sheet to pin-point the amount of lumens you need for your lighting choices. |
| Click Here for FREE Cheat Sheet |
BEST BUY |
A pendant lamp is a type of light fixture that hangs down from the ceiling. It has an open bulb socket near the bottom, meaning it does not have any shade on it. The rest of the shade can be inside or outside of this fixture for different effects. A pendant lampshade is designed to go over a hanging light and it often has a pleated or scalloped appearance.
Yes. But you need to take into account the diameter of your light fixture, which will be different than most other sizes that are sold at hardware stores.
To clean fabric or silk shades, try wiping it down with a sponge lamp cleaner, or a soft cloth. You can also remove most dust in minutes by using a sticky-tape lint-roller, soft brush or vacuum with the brush attachment. For paper or parchment shades, wear gloves to prevent dirt and oils from your hands getting on the shade. Use a dry microfiber cloth to gently brush clean. Plastic shades can be cleaned by using warm water and dish detergent. Gently wipe them down with the soft cloth and then let them air dry!
When changing lamp shades, you need to get the size right.
When shopping for a new lamp shade, follow these guidelines to get started:
Height: The lamp shade should be 1/3 the height of the lamp. If it is not, change it.
Width: The width of the shade should be 2x the width of the base.
Testing commonly used brightness levels of LED bulb by color accuracy, color saturation and dimming performance, are the top priorities to consider.
Estimate a chandelier size following a simple proportion rule to the size of your room, factoring in chandelier height with positioning tips.
Are you unsure about the various colours of LED lights? We explain the differences & make comparisons to help you determine which one is suited for your needs.
The best headlamp for fishing is lightweight, comfortable, robust with variable outputs. We compared dozens & received expert advice to choose our top picks.
Easily learn to calculate how many lights can go on a 20 amp circuit by a step by step guide to the circuit capacity with your chosen lighting products.
Airlines use LED lighting within plane interiors, so LED is safe to use and can be taken on. However, there are rules about how LED lighting may be used.
LED lights are safe to use all night, we explore why, looking at the pros and cons of all night illumination with tips on using LED as the source of light.
Troubleshoot your LED light fixture with 15 reasons why your LED light is not working but still has power, checking bulb components, fixtures and conditions.
Comparing the key projector brightness measurement differences, where 1 ANSI lumen = 0.8 ISO lumens, we explain which one is more important.
LED lighting has proven to be the best light source for the environment and your budget, creating lower bills due to it’s radical efficiencies wide adoption.